Pedestrian Easy-Gate - Specification
This page includes information about the technical specification of the Pedestrian Easy-Gate. Information about design and installation is also available.
Easy-Gate is a fully welded robust construction. The unit is 1300mm wide over posts with a clear opening of 1m to comply with DDA regulations.
The gate frame is constructed using 50mm x 50mm x 3mm RHS. With a 50mm x 75mm x 3mm RHS bottom rail. All the infills are 16mm diameter solid bar. The closing post is 80mm x 80mm x 3mm and the hanging post is 80mm x 80mm x 5mm RHS.
Top and bottom hinge plates are constructed in 60mm x 15mm solid flat. The bottom hinge has an additional reinforcing welded fillet to reduce the risk of vandalism.
The bearing houses are lathed to give an engineering finish. Easy-Gate swings on stainless steel sealed for life bearings in inverted cups to keep out dirt and water with a 20mm stainless steel top shaft and drive shaft. NO other gate on the market has this important feature.
The gate unit weighs approximately 68kg.
Download Easy-Gate Detailed Specifications
 |
Flat Top 1000 mm high or 1200 mm high |
 |
Bow Top 1000 mm high or 1200 mm high |
 |
Country Cross 1000 mm high or 1200 mm high |
 |
Estate 1000 mm high or 1200 mm high |